In nearly all cases, most individuals spend quite a lot of money buying their lift truck. Hence, it is extremely important to take good care of it so as to protect your investment well into the long run. It is really a good idea to know the procedures that are undertaken in maintaining and taking care of this machine.
By starting up the forklift and listening carefully how it runs is one of the best ways to tell how good the engine is performing. Like for example, if there are any misses or knocks, the equipment is defective and this should raise several concerns. What's more listen carefully for any squealing sounds that come from the belts because these sounds would provide you with a lot of information.
Several of the main parts needing attention during maintenance comprise the horn, safety warning devices, gauges, the lights and the overhead guard. Any burnt out light bulbs or faulty components must be replaced as soon as they are noticed. It is also vital to inspect the wiring.
The battery compartment terminals must be cleaned when the above parts have been inspected carefully. If the terminals are not clean, be sure to clean them properly. Each and every cell of the battery must be checked so as to make sure that the fill level is topped up to the regulated amount.
The next step is to drain all of the oil out of the machine and then change the filters. The fuel filters, hydraulic filter and the transmission filter should be replaced regularly. Prior to fitting them, be sure to write the date on the new filters by utilizing a permanent marker in order to keep track.
After the oil change is carried out and the filters have been replaced, a visual inspection of the drive axle needs to be carried out. If there is a grease fitting on the axle make sure to apply some grease. Check the belts on the engine for any frays or cracks. If you find any, fix the problem accordingly. After that, inspect every other part of the machinery like the wheels. If any kind of fault or issue is detected, be sure to address it immediately in order to make certain the equipment is working at its safest and optimum levels.