Propane Tank Regulations
The LP or liquid petroleum system style gas container is an OSHA term which refers to the regulators, piping, hoses, regulators, valves and fittings. The agency needs particular parts depending upon the tank's capacity. These individual components must go trough recognized laboratory testing. The right laboratory approval proves that the system components meet pressure, thickness and construction standards.
Tank Location
The organization OSHA determines how close the propane tank can be mounted in relation to buildings, to ignitable materials, to tanks that contain flammable liquids, cutting torches and welders. These stringent rules are implemented to make the jobsite as safe as possible for the workers and other people who are in close proximity.
Nameplate Marks
LP systems require that the name, the address, the supplier of the container, and or the tanks brand name, be marked on the propane container. The capacity of the container is to be listed with the following information: pounds or gallons of fuel, square foot outside surface, fill level, and pressure. In addition, information about whether or not the container is designed to be installed above ground or underground is also visible. These markings must be on a metal plate attached to the container somewhere visible. OSHA requires that every tank has to be marked by the Pressure Vessel Inspectors and National Board of Boiler in order to be considered safe and ready to use.
Tank Modifications and Repairs
OSHA also regulates any repairs to the LP systems, like welding. The employees performing repairs and the tank owners must understand the standards and regulatory codes that the tanks were made. Welding repairs to any system component that is subject to internal pressure should first follow these fabrication codes. Any other kind of welding is just permitted on lugs, brackets or saddle plates.
The OSHA works hard to ensure that individuals who work with forklifts and nearby are kept safe. They have stringent rules and training procedures in place so as to make certain that these industrial equipment and their repair processes are handled as safe as possible and with respect. It is important that companies follow their rules and steep fines can occur if they are not adhered to.